Differences

This shows you the differences between two versions of the page.

--- guides:safenet_installation [2019/01/16 23:58] – administrator
+++ guides:safenet_installation [2024/06/14 22:15] (current) – greg.dapkus
@@ Line 2: / Line 2: @@
-These installation instructions are for the SafeNet Authentication Client 10.2
+These installation instructions are for the SafeNet Authentication Client 10.8
@@ Line 21: / Line 21: @@
 The current version of the Entrust SafeNet Authentication Client software can be downloaded from the following URL:
-[[https://admin.certna.org/Downloads/SAC102.zip]]
+[[https://knowledge.digicert.com/general-information/how-to-download-safenet-authentication-client]]
-This zip file is approximately 75 MB in size.
+This zip file is approximately 20 MB in size.
 **Important Note:** If you currently have another version of the SafeNet Authentication Client installed you will need to use the Windows Control Panel to uninstall the older version, before installing an updated version of the SafeNet Authentication Client software.
-**To install the SafeNet Authentication Client 10.2 software make sure your token is NOT plugged in.**
+**To install the SafeNet Authentication Client 10.8 software make sure your token is NOT plugged in.**
-Unzip the SAC102.zip file to a working directory, for example C:\SAC102_Setup or a name of your choosing.
+Run the downloaded Installer (E.G. SafeNetAuthenticationClient-x64.msi) to start the setup process.
-Once the zip file has been extracted open the following subfolder:
-C:\{your workfolder}\SafeNet Authentication Client 10.2\EXE Installer
-{{ :guides:images:safenet002.png |}}
-Double-click the SafeNetAuthenticationClient-x32-x64-10.2.exe program to start the setup process.